How To Unlock The Nokia Mobile Phone Password

Here i will tell you how to hack or get nokia mobile phone passwod.
By this trick you can get master code of nokia phone which is unique or differernt for all nokia phones.

Calculate your nokia mobile phone security master code easily by online nokia site.
It is completely free.


First You have to do is.
dial *#06# to get IMEI number of phone that you have to unlock the password.
Second
Go to this site :- http://www.nokialockcode.com/calculate.php
Enter the 15 digit IMEI number which you get from above method
Than calculate it by pressing the calculate button .
Enjoy

How Can I Hack Any Mobile Sim Card For Free Internet?

If you have a mobile SIM card for a cellular phone and want to hack it for free internet, open the phone, then go to the menu, and then press 0 which will open up the service menu, the code is 00000. Go to the web settings and then proxy address settings to change the primary and secondary addresses. You'll want to change it to your own proxy settings. You'll also need to reset the port on the phone by going to web settings and changing the port number to 8080.

Once you have entered a new proxy setting, press OK and then clear. Then reset the home page on your phone to Google or Yahoo or something similar. Hit OK and then your phone should reboot. After your phone comes back up use a laptop or a desk top computer to configure a dynamic IP address that your phone will use. There are several freeware programs on the internet that will do the job for you, so do a Google search on dynamic IP addresses and take your pick of the programs available.

Make sure you do this on your own phone as some cell phones will work using this method and some will not. One phone that is known to work in this manner are phones manufactured by the LG Corporation. You could cause the phone to stop functioning if you make a mistake doing this process, so take your time and make sure you know what you are doing. In this day and age of free wireless hot spots on every street corner, you're better off going to one of these places rather than using a phone with a small display and little real computing power. You'll get fast response and you can't get in trouble for using something that is free.

How To Make Money From Blogging

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Are you a newbiein blogging fieldand wonder that how people are making money from their blogs? Well not everyone does earn from blogging. Frankly saying, the success ratio is very less, but it all depends on your approach. You might be interested to join that ‘Small’ portion. If this is so, then this article is meant for you as I am going to list down the best ways to make money from a blog. Do check them out, as who knows, you may find a suitable one for you? Let's proceed ahead with the list.
 

Display Ads on Blog


The best and most used way to make money from a blog, is by displaying adson it. There are a no. of ad serving companies that let you to display ads on your blog. You can opt for any of your choice. Google Adsenseis recommended for everyone. Though the approval process is bit tough, but it pays the most.

Paid Reviews


If your blog has got good stats like good Alexa Rank, Pagerank, Page Authority, Domain Authority, then you will get many offers from the advertisers regarding the paid reviews. You just need to review the advertiser's product or service on your blog, and advertiser will pay you a handsome amountfor doing so.
 
 

In-text Advertising


Don't want to show the ads on your blog and want to keep it simple and clean? If yes is your call, then opt for In-text advertising. There are plenty of In-text advertising networks available and when used on your blog, they convert the normal texton your blog into clickable links. Each click generates revenue, which is shared in a fixed ratio between you and ad network.

Affiliate Marketing


Affiliate marketing is difficult way to make moneyfrom blog and it requires a successful blog to show you some positive results. If you have got one such blog, just apply for affiliate networks of your desire and place the affiliate links on your blog. Whenever someone will buy the product following your affiliate link, you will get commission. Simple.But to learn only, not to master.


Offer your Services

Your blogging journey teaches you a hell lot of things. It improves your skills in various fields. You can now offer your experience to newbies, for a decent amount. To get clients for your services, it's good to place a ' Hire Me' page on your blog. Your blog's visitors will check out the services offered by you, and will like to hire you, if they want.

Many more ways, but listed best ones only, the ones which can bring best results for you in this aspect.Ahhan! Stop reading now and give these ways a practical shot now. A huge money is waiting for you behind the curtains of blogging. It’s up to you whether you can grab it or not. Many are doing it already. Work hard, implement what you learnt here, and join the queue of those ‘Many’ people.

How To Optimize Your Blog Post Titles for Better SEO Friendly

The reason most of the blogger templates aren’t that SEO friendly because templates available in Blogger were designed long ago and haven’t been updated, probably since 2007, since then Google SEO algorithm has changed a lot and as being on blogger you don’t want to be left long away, to keep up with the competition making your Blogger template SEO friendly is very important and so this small SEO related article will help you to leave your competitors behind.


If you are also using a template from Blogger then you need to make some changes on it to fit your needs and also to fit the search engine needs. Normally search engine don’t focus on the markup importantly but it’s a good thing to change it to something user friendly. What Blogger templates like ‘Simple’, Travel’ etc. have h1 tag as it’s Blog title, which is normal. But the Post title is not okay that all, it is in an h3 tag, for many reasons your blog might not being shown up in the search results and this is on of those reasons.
You won’t find any difficulties with a WordPress theme, as they are freshly published and reviewed by experts but templates in Blogger were made by expert but not freshly launched. Just as the search engines detects an anchor link because of it’s markup then why can’t they see what heading is being used for what area.

OPTIMIZE THE POST TITLE TO HEADING2 IN BLOGGER

Enough about it’s effect, let’s talk about how to make the changes applicable. These easy instruction will give you the easiest way to turn your post title to h2 from h3.
  1. First of all login to your Blogger Dashboard
  2. Go to the Template tab and click on Edit HTML, ignore the warning and proceed.
  3. Check mark the ‘Expand Widget Template’
  4. Use CTRL+F and search for this line
    <h3 class='post-title entry-title' itemprop='name'>
  5. All you have to do is just change the <h3> to <h2>, change of only a number. But we aren’t done yet, remember there’s still an ending/closing tag. You have to change both starting <h3> and ending</h3> tag into the template. In the middle it’s all XML codes that works on the server to serve an HTML page.
    Changing the closing and starting h3 tagAfter you turn the starting h3 to h2, do remember to change the ending tag too or it will create difficulties while saving the template.
  6. You will find the tag two times. one is for Desktop Version Template and another is for Mobile version Template. I recommend you to change all h3 that marks as the post title to h2. Searching for <h3 will bring up the codes but as i already said, remember to change corresponding closing tag too.
Yeah that’s it ! It doesn’t only increase visibility and beauty of your blog in search results but also make your blog user friendly. Now stop using h3 for your post title, h3 is only good in the post body for heading. This was not a big change or addition for better SEO in your blog but remember it is how SEO works, there’s no easy and direct way to get to the top of search results, small and effective actions you take regarding your blog makes it a hit on SEO and search engines.
Don’t get worried if your blog don’t do too good in the search results, keep posting and that’s the most important aspect in getting to the top. And this blog is always free to read, check post related to Blogger SEO for some more amazing post and do subscribe for our coming posts.

[Tricks] How to Increase Internal Memory in Htc Explorer And Android Mobiles (Root Needed)


One of the most common gripes we hear from HTC Explorer owners is that it doesn’t take too long before you fill up the phone’s internal memory.As this mobile has a 512MB ROM, only around 110MB can be used for apps or games. Obviously manually moving your apps to the SD card is one answer to this problem, but this can be a pain to manage and sometimes part of the app will remain in internal memory.
To get round this problem, I’ve written the following guide. In layman terms, Link2SD uses a secondary partition on your SD card and uses it as another segment of internal memory. Link2SD moves and links apk files, dalvik-cache (.dex) files and lib files onto this partition, which the OS mounts on boot. The great thing is that these linked apps remain available when your phone is connected in mass storage mode as Android only unmounts the first partition. Also, you don’t need to worry about linking something you weren’t meant to as Link2SD doesn’t allow you to link system applications as an alternate you can freeze or remove the system apps to free up some memory using root uninstaller software.
Link2SD allows you to pick which apps to move to the SD card, you can auto-link new installs and the whole thing is wrapped in a user-friendly UI. I’ve been using Link2SD for a while now and it’s a godsend, especially for the Explorer where we tend to download a lot of games. If you’re constantly managing your internal memory I highly recommend you give Link2SD a try, see the full guide below.


Guide to using Link2SD on your Explorer


This guide may seem lengthy, but trust us when I say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.

1. PREPARATION
Please make sure you have completed all of the following before starting the tutorial.
On your PC:
On your Explorer:
  • This app needs root privilege.To root your mobile follow this guide.
  • Install Link2SD from Android Market onto Explorer. It is a free download.
CREATING SECONDARY PARTITION ON YOUR SD CARD:
You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later (and the stock kernel of explorer only supports the fat32 partition,if you have any custom kernel with ext2,3,4 support i suggest using ext4 ). You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adapter as the process below creates the partition whilst the phone is connected to your PC.
a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.

b) Click on the memory card under Disk 2 in Mini Tool and then in the left pane, press ‘Move/Re-size Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below I created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.



 
 
 
 
 
 
 
 
 
 
 
 
c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of Mini Tool. Right click this new partition and then press ‘Create’.


You'll see a pop-up ,just press ‘Yes’ to continue.

d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.



e) This should bring you back to the main Mini Tool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.

This will bring up another pop-up window and will take several minutes to both re-size and create the secondary partition.


2. LINK2SD
This application makes it easy for users with root privileges on their phone to move applications to the SD card.
a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.










You will then see the Superuser Request, click ‘Allow’.

Once you see the following message, restart your phone. The app should now be ready to use.












b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In my case, you can see that the second partition is 1GB(as i've used it for some apps its filled but u must see 1GB free i.e 100% free in your case).

c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
If you want to move all of your apps, pressing the multiselect will bring up another menu allowing you to do this by selecting select all.

d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in orange font in the Link2SD app list. Reboot your phone.

e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.

Here Is 3 FREE SEO Plugins For Your Blog Must Use It

I would like to share 3 valuable wp plugins:

SEO No Duplicate – This plugin helps you manage your search engine duplicate content, by setting your post page’s canonical to the permalink.

Broken Link Checker
– This plugin will check your posts, comments and other content for broken links and missing images, and notify you if any are found.

Redirection Plugin - Acts as an even better solution to the 404 (broken links) problem. Redirection is a WordPress plugin to manage 301 redirections and keep track of 404 errors without requiring knowledge of Apache .htaccess files.

Add New Floating Social Sharing Bar Widget To Your Blog

Live Preview - Demo

How to Add Floating Social Sharing Bar Widget?

First,
  1. Login to New Blogger Dashboard > Choose your Blog and Click the More Options Dropdown
  2. Select the Template > Click on Edit HTML > Proceed
  3. Check/Tick the Expand Template Widgets checkbox
Just follow 3 Simple steps,

The jQuery Plugin!

As always, it is jQuery based widget, and your blog must have the jQuery plugin. if your blog already have a latest jQuery plugin, then Ignore this step and directly follow the Second step.
If not add the below snippet code before </head> tag
<script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.js"></script>

The Social Scripts

This Code contains jQuery calls and Social button scripts and styles, and those are loads only in Post Pages which will decrease, load time when you on home or other pages. ;)
Add the below snippet code before </head> tag
<b:if cond='data:blog.pageType == &quot;item&quot;'>
<style type='text/css'>
/*<![CDATA[*/
 #w2bSocialFloat {clear:both;padding: 6px 0;display:block;background:#FFFFFF;}
 #w2bSocialFloat td{padding:4px;margin:0;border:none;}
 #w2bSocialFloat td iframe{max-width:82px;width:82px !important;}
 #w2bSocialFloat.w2bFloatSocial{position: fixed;top:0;z-index:9999999;border-bottom:1px solid #ccc;-webkit-box-shadow:0 1px 1px rgba(0,0,0,0.15);-moz-box-shadow:0 1px 1px rgba(0,0,0,0.15);box-shadow:0 1px 1px rgba(0,0,0,0.15);}
/*]]>*/
</style>
<script type="text/javascript">
/*<![CDATA[*/
// Set the Top Offset
$theOffset = 0;

jQuery(document).ready(function(b){var a=b("#w2bSocialFloat");a.wrap('<div id="w2bSocialPlaceholder"></div>').closest("#w2bSocialPlaceholder").height(a.outerHeight());a.width(a.outerWidth());e=a.offset().top-$theOffset;b("#w2bSocialFloat iframe[src*=plusone]").closest("div").css("max-width","82px");b(window).scroll(function(){d=b(this).scrollTop();d>=e?a.addClass("w2bFloatSocial"):a.removeClass("w2bFloatSocial");f=b(".post");if(f.length!=0){c=f.outerHeight()+f.offset().top;d>=c?a.stop().animate({top:"-150px"}):a.stop().animate({top:$theOffset+"px"})}else d>=e?a.css("top",$theOffset+"px"):a.css("top","0")})});
/*]]>*/
</script>
<script type="text/javascript" src="http://widgets.way2blogging.org/blogger-widgets/w2b-blogger-pinit.js"></script>
<script type="text/javascript">
/*<![CDATA[*/
 // Twitter
 (function(a,b,c){var d=a.getElementsByTagName(b)[0];if(!a.getElementById(c)){a=a.createElement(b);a.id=c;a.src="//platform.twitter.com/widgets.js";d.parentNode.insertBefore(a,d)}})(document,"script","twitter-wjs");
 // Google + (plus)
 (function(){var a=document.createElement("script");a.type="text/javascript";a.async=true;a.src="https://apis.google.com/js/plusone.js";var b=document.getElementsByTagName("script")[0];b.parentNode.insertBefore(a,b)})();
 // Stumbleupon
 (function(){var a=document.createElement("script");a.type="text/javascript";a.async=true;a.src="https://platform.stumbleupon.com/1/widgets.js";var b=document.getElementsByTagName("script")[0];b.parentNode.insertBefore(a,b)})();
 // Digg
 (function(){var a=document.createElement("SCRIPT"),b=document.getElementsByTagName("SCRIPT")[0];a.type="text/javascript";a.async=true;a.src="http://widgets.digg.com/buttons.js";b.parentNode.insertBefore(a,b)})();
/*]]>*/
</script>
</b:if>

Adding Social Buttons Widget

Let’s add the final Social horizontal bar widget code.
Add this code before <data:post.body/> tag.
<b:if cond='data:blog.pageType == &quot;item&quot;'>
<div id="w2bSocialFloat" class="w2bSocialFloat">
<table  width="100%" class="w2bSocialFloat">
 <tr>
  <td>
   <a href="https://twitter.com/share" class="twitter-share-button" expr:data-url="data:post.url" expr:data-text="data:post.title">Tweet</a>
  </td>
  <td>
   <iframe expr:src="&quot;//www.facebook.com/plugins/like.php?href=&quot; + data:post.url + &quot;&amp;send=false&amp;layout=button_count&amp;width=80&amp;show_faces=false&amp;action=like&amp;colorscheme=light&amp;font&amp;height=21&quot;" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:80px; height:21px;" allowTransparency="true"></iframe>
  </td>
  <td>
   <div expr:id="&quot;w2bPinit-&quot; + data:post.id" style="display: none;visibility: hidden;height: 0;width:0;overflow: hidden;" class="w2bPinitButton"> 
    <data:post.body/>
    <script type="text/javascript">
     w2bPinItButton({ 
      url:"<data:post.url/>", 
      thumb: "<data:post.thumbnailUrl/>", 
      id: "<data:post.id/>", 
      defaultThumb: "https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiwTJZGSp4h_WXUIZSa4V-RjxQ_5rUaEIVDb4OMi3IvZatrRcYNpsZpo15zn6P1xDPDwYA46q8Amc8L-dpt6-mrfJnEZaejn8GBdrCdvBYzNaAq0uetYg_pTb9JL_XdgswXgwxwhNSvF6Ex/s1600/w2b-no-thumbnail.jpg", 
      pincount: "horizontal" 
     }); 
    </script> 
   </div>
  </td>
  <td>
   <div class="g-plusone" data-size="medium" expr:data-href="data:post.url"></div>
  </td>
  <td>
   <su:badge layout="1" expr:location="data:post.url"></su:badge>
  </td>
  <td>
   <a class="DiggThisButton DiggCompact"></a>
  </td>
 </tr>
</table>
</div>
</b:if>

Save Template!!!

Save the template and check your blog post pages, a working and awesome jQuery based floating social horizontal bar on your blog.
Hope this widget is helpful to you, Please leave your comments, and share this Widget.
Thanks to Raghav! for requesting this simple and awesome widget.

Update :-

1. I found the tag Three times?

If you found the <data:post.body/> three times, then you might using the Auto readmore hack,
Solution:
Search for below two lines
<b:if cond='data:blog.pageType == &quot;item&quot;'>
<data:post.body/>
Place the Widget code in between the two tags.

2. How to change the background color of Horizontal bar?

You can change the background color of Horizontal bar.
Solution:
In the Second step (The Social Scripts), search for
background:#FFFFFF;
and change the #FFFFFF with your own Hex Color.
Thanks to All.